Severe Service Union Bonnet Valves·MWP : 6000psig/413bar·MWT : -53~232°C/-65~450°F(Optional Grafoil packing up to 648°C/1200°F)·Size : UNILOK 1/4 " ~1 " OD & 6~12mm OD, Pipe Thread 1/8 " ~1 " , WeldedSystems·316SS, Alloys·Integral bonnet design ensuring high integrity seal under severe service·Panel mounting without packing disruption

Instrumentation Gate Valve (VGT3)■ Design Spec : ANSI/ASME B16.34■ Pressure Rating : Up to 3,600 psig (248bar) @21 ◦ C■ Temperature Rating :From -23◦C to 232◦ C (-65◦ F to 350 ◦ F) with PTFE packing, up to 648◦ C (1200◦ F) with grafoil packing■ Body Materials : Standard 316 stainless steel, A105 and alloy400■ Compact forged body design■ Back seat design provides anti-blow out of stem and seal■ The hard faced seat ring and wedge enable longer life cycle■ Packing bolt allows easy packing adjustment for leak tight sealBar■ Handle Low operating torques

General, High Pressure, Compact, Adjustable Check Valves·MWP : 3000psig/207bar (VC3, VC3C, VC3CA series), 6000psig/413bar (VC6 series)·MWT : -53~232°C/-65~450°F·Size : UNILOK 1/8 " ~1 " OD & 3~25mm OD, Pipe Thread 1/8 " ~1 " , UCR 1/4 " ~1/2 "·316SS, Brass, Alloys·VC3 3000psig general purpose·VC6 6000psig high pressure·VC3C 3000psig compact 1 piece body·VC3CA compact adjustable cracking pressure

Industrial Excess Flow Valves·MWP : 6000psig/413bar·MWT : -23~204°C/-10~400°F·Size : UNILOK 1/4 " ~1/2 " OD & 6~12mm OD, Pipe Thread 1/4 " ~1/2 "·316SS, Alloys·Two piece body enabling simple spring and seal maintenance·High flow capacity·Automatic reset by the bleed vent

Cylinder Connector (CGA & JIS Series)Glands : Type A, Type B, Type CBearingsGaskets : Gasket with 316SS Ring, Gasket without 316SS RingNuts : Female Nuts, Male NutsPlugs : Female Plugs, Male Plugs

Micro In-Line & Tee FiltersVFI series (In-line Filters)Maximum working pressure up to 3000psig (206bar) at 100°F(37°C)For limited space and when filter element don t have to be replaced oftenCompact design with broaden filtration rangesVFT series (T Filters)Maximum working pressure up to 6000psig (413bar) at 100°F(37°C)Easy replacement of filter element on-lineUnion bonnet design for safe high pressureapplicationBypass option for sampling or purging of process fluid

Metering Valves·MWP : 2000psig/137bar (VMTS series) 1000psig/69bar (VMTL & VMTMseries)·MWT : -23~204°C/-10~400°F(Optional Buna-N O-ring up to 148°C/300°F)·Size : UNILOK 1/8 " ~1/4 " OD & 3~6mmOD, Pipe Thread 1/8 " ~1/4 " ,UCR 1/4 "·316SS·Fine orifice and close thread tolerance offering accurate control·Panel mounting for easy installation

PTFE Pipe FittingsUnion Tee (UUT)Male Connector (UMC)Male Elbow (UME)·MWP : 125psig/8.6bar·1/4 " ~1/2 " , 6~12mm

Ultra High Purity Gas FilterTo meet the requirements of SEMI E49.8-96, theUNILOK GF Series gas fiter is optimized for gasfiltering applications.UNILOK GF Series is made up ot 316L VAR stainless steel housing and sintered construction filter that will be best sloution for UHP application.

Weld & UCR FittingsLong Elbow 90' (CLE)Reducing Long Elbow 90' (CLRE)Long Tee (CLT)